Multiquip CV2a/2B ユーザーズマニュアル
page 8 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13)
noise anD Vibration figures
noise emissions
It is recommended the operator wear hearing protection while operating the power tool.
Sound pressure level at the work station: L
Sound pressure level at the work station: L
pA
= 82.5 dB (in accordance with EN ISO 11203)
Sound pressure level: L
WA
= 93.5 dB (in accordance with EN ISO 3744)
Vibration emissions
Vibration Emissions Value = 1.23 m/s²
Uncertainty = 1.5 m/s²
The declared vibration total value has been measured in accordance with a standard test method (EN 60745-2-12; 2009
Uncertainty = 1.5 m/s²
The declared vibration total value has been measured in accordance with a standard test method (EN 60745-2-12; 2009
6.2.6.3) and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).