Mitsubishi Electronics FR-A701 ユーザーズマニュアル

· Set "10 or 11" in Pr. 161, then press 

 for 2s to make the setting dial and key operation invalid.

· When the setting dial and key operation are invalid, 

 appears on the operation panel.

If dial and key operation is attempted while dial and key operation are invalid, 

 appears. (When dial or key

is not touched for 2s, the monitor display appears.)

· To make the setting dial and key operation valid again, press 

 for 2s.

Operation using the setting dial and key of the operation panel can be invalid to prevent parameter change, and
unexpected start or frequency setting.

Set "10 or 11" (key lock valid) in Pr.161 Frequency setting/key lock operation selection.

Stop and reset with 

 .

Release the operation lock to release the PU stop by key operation.

1.

Screen at power-ON

     The monitor display appears.

Display

Operation

PU indicator is lit.

2.

Press         to choose the PU 

     operation mode.

3.

Press          to choose the parameter 

     setting mode.

7.

Press         to set.

5.

Press          to read the currently set value.

4.

Turn          until                            appears.

The parameter 
number read 
previously 
appears.

8.

Press        for 2s to show the key lock.

Press for 2s.

(

Pr. 161)

     "    " (initial value) appears.

6.

Turn          to change it to the setting 

     value  "      ".