Moen YB9222CH プリント

1.

Position the mounting template on the wall in the desired location.  
Using a level, align the template and tape it to the wall.

2.

Remove each mounting post from the body by loosening the setscrew. 

3.

Place each mounting post on the template with notch facing down.

4.

Mark the 2 large hole locations of each mounting bracket.

5.

Attach each mounting bracket to the wall, using the wall anchors 
provided

6.

Mount each base on the corresponding mounting bracket.  Check and 
make sure that the base set screw hole(s) are facing down.  Assemble 
a set screw to each base.  Use the allen wrench included in hardware 
kit to tighten each set screw and secure the assembly to the mounting 
bracket(s).

7.

Tighten all 4 screws.  Do not over tighten.  

8.

Assemble the Towel bar and posts.  

9.

While assembled, Position each end post with the setscrew down and 
place over mounting post.  Tighten the setscrew at the bottom of each 
base.

2 5 3 0 0   A L   M O E N   D R I V E  

•

N O R T H   O L M S T E D ,   O H   4 4 0 7 0  

C O R P O R A T E   H E A D Q U A R T E R S :   ( 8 0 0 )   3 2 1 - 8 8 0 9  

•

F A X :   ( 8 0 0 )   8 4 8 - 6 6 3 6

I N T E R N A T I O N A L :   ( 4 4 0 )   9 6 2 - 2 0 0 0  

•

F A X :   ( 4 4 0 )   9 6 2 - 2 7 2 6

C U S T O M E R   S E R V I C E   ( U S A ) :   8 0 0 - 8 8 2 - 0 1 1 6  

•

F A X :   ( 8 8 8 )   3 7 9 - 2 7 2 0

W W W . C S I . M O E N . C O M



Copyright Creative Specialties International

Literature #BA1454  

Double Towel bar posts are constructed 
of zinc.  Bars are constructed of 
aluminum. 

q

YB9222BN – 24” Double Towel Bar
Brushed Nickel Finish

q

YB9222CH – 24” Double Towel Bar
Chrome Finish

Stock Number:__________________Double Towel Bar
By CSI Bath Furnishings                

To preserve the fine finish of this product, clean only with a soft 
damp cloth.  Dry well. Do not use commercial or abrasive cleaners.