Mitsubishi Electronics E60 ユーザーズマニュアル

 
Always read the specifications issued by the machine maker, this manual, related manuals and attached 
documents before installation, operation, programming, maintenance or inspection to ensure correct use.  
Understand this numerical controller, safety items and cautions before using the unit. 
This manual ranks the safety precautions into "DANGER", "WARNING" and "CAUTION". 
 

 

 

DANGER 

When the user may be subject to imminent fatalities or major injuries if handling is 
mistaken. 

 

 

 

 

 

When the user may be subject to fatalities or major injuries if handling is mistaken. 

 

 

 

 

 

When the user may be subject to injuries or when physical damage may occur if 
handling is mistaken. 

 

Note that even items ranked as " 

 

 CAUTION", may lead to major results depending on the situation. In any 

case, important information that must always be observed is described. 

 

 

 

 Not applicable in this manual. 

 

 

 

 Not applicable in this manual. 

 

 

 

  If the descriptions relating to the "restrictions" and "allowable conditions" conflict between this 

manual and the machine manufacturer’s instruction manual‚ the latter has priority over the former.

  The operations to which no reference is made in this manual should be considered impossible.

  This manual is complied on the assumption that your machine is provided with all functions. 

Confirm the functions available for your machine before proceeding to operation by referring to 
the specification issued by the machine manufacturer. 

  In some NC system versions‚ there may be cases that different pictures appear on the screen‚ 

the machine operates in a different way on some function is not activated. 

 

  If the BATTERY LOW alarm is output, save the machining programs, tool data and parameters 

to an input/output device, and then replace the battery. If the BATTERY alarm occurs, the 
machining programs, tool data and parameters may be damaged. After replacing the battery, 
reload each data item. 

[Continued on next page]