Honeywell NetAXS ユーザーズマニュアル
42
www.honeywell.com
Configuring via the Web Server
Configuring the System
Configuring the System
2.4.3 Inputs Tab
Three inputs are associated with each of the four doors on a NetAXS™ panel:
• Status – Provides the following door status information:
• Egress – Allows the door to open or close normally without generating an alarm.
• Tamper – Reports abnormal handling of the reader device or wiring.
• Egress – Allows the door to open or close normally without generating an alarm.
• Tamper – Reports abnormal handling of the reader device or wiring.
Click to display the
Inputs
tab:
Figure 2-15: Configuration > Doors > Inputs Tab
Note that there are four possible Mode configurations. Shown in the screen above is the Normally
Closed/Unsupervised Mode. The following screens show the remaining modes:
Closed/Unsupervised Mode. The following screens show the remaining modes: