Honeywell NetAXS ユーザーズマニュアル
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A
45
2.5 Configuring Access Levels
Every card is assigned an access level. The access level specifies the time zone, or time schedule,
during which the card holder can be granted access at a specific door. For example, an access level
embedded in an employee’s card might allow the employee to enter the facility only through door 2
from 6:00 a.m. to 6:00 p.m., Monday through Friday.
This section explains how to create the access levels that subsequently can be assigned to cards.
during which the card holder can be granted access at a specific door. For example, an access level
embedded in an employee’s card might allow the employee to enter the facility only through door 2
from 6:00 a.m. to 6:00 p.m., Monday through Friday.
This section explains how to create the access levels that subsequently can be assigned to cards.
Note:
Since an access level is defined by door and time zone configurations, you must configure the
door (see “
“ on page 31) and the time zone (see “
“ on page 24) before configuring an access level.
Click Access Levels to display the Access Level Configuration screen:
Figure 2-16: Configuration > Access Levels
The Access Levels screen enables you to:
• Create an access level.
• Modify an access level.
• Delete an access level.
• Set a Time Zone for each door.
• Modify an access level.
• Delete an access level.
• Set a Time Zone for each door.