Philips HTS6600/05 クイック設定ガイド

1

Connect

A 

Placement

Proper speakers system placement is important to 
ensure optimum sound performance.

A

  Place the speakers at the normal listening ear level, 

equal distance from the TV and face it straight ahead 
towards the listening area.

B

  Place the subwoofer on the floor, at least one metre 

away from the TV.

B 

Remove rear cover from main unit

A

  Carefully push down the rear cover from the top 

and detach it from the main unit.

B

  After all the connections have been made (see the 

following sections for details), close the rear cover 
by fitting the catches into the holes and pushing 
upwards.

2

Set up

C

 

Connect the speakers and main unit 

to subwoofer

B

A

A

  Connect the left speaker to the SPEAKER LEFT 

socket and the right speaker to the SPEAKER 
RIGHT socket at the rear of the subwoofer.

B

  Connect the TO MAIN UNIT cable from the 

subwoofer to the TO SUBWOOFER socket at the 
rear of the main unit.

D 

Connect the main unit to TV

z

  Connect a scart cable (supplied) from the 

SCART OUT (TV1) socket on the main unit to the 
SCART IN socket on your TV.

z

  If your TV supports HDMI, connect the HDMI cable 

(not supplied) from the HDMI OUT to the HDMI IN 
socket on your TV.

A 

Finding the viewing channel

A

 Press 2 (STANDBY ON) on the main unit to turn 

it on. 

B

  Turn on the TV. Use the TVs remote control to 

select the correct viewing channel.

Note  To search for the correct viewing channel, 
press the Channel Down button on the TVs remote 
control repeatedly (or AV, SELECT, ° button) until 
you see the Video In channel. 

B 

Setting up the speakers

When you turn on this unit for the fi rst time, the 
speaker setup message appears on the TV. 

A

 Press SETUP on the remote control to enter 

‘General Setup Page’.

B

  Press cursor down to highlight { Ambisound 

Setup } followed by pressing cursor right key.

C

  Select one of the options below and press cursor 

right key.

{ Room Acoustics }  
{ Hard } - for concrete or wooden walls.
{ Soft } - for curtains or an open space.

{ Speakers Distance }  
{ Near } - ‘X’ is less than 1.2 metres (3.9 ft).
{ Default } - ‘X’ is between 1.2~2 metres (3.9~6.5 ft).
{ Far } - ‘X’ is more than 2 metres (6.5 ft).

{ Listening Position } 
{ Near } - ‘Z’ is less than 2 metres (6.5 ft).
{ Default } - ‘Z’ is between 2~3 metres (6.5~9.8 ft).
{ Far } - ‘Z’ is more than 3 metres (9.8 ft).

Note  The underlined options are the default setting.  

TV

FRONT R

FRONT L

D

  Select a most suitable predefined setting and press 

OK to confirm. 

E

  Once complete, press SETUP to exit the menu.

Note  Refer to the accompanying user manual 
for other setup options.

E 

Connect the radio antennas and 

power cable

Keep the antennas away from the electronic devices to 
prevent unwanted interference.

A

B

C

A

  Connect the FM antenna to the inner pin of the 

FM 75  socket. Extend the antenna for optimum 
reception.

B

  Unfold the AM/MW loop antenna and fix the claw 

into the slot. Push the tabs and insert the wires into 
the AM/MW sockets

C

  Connect the power cable from subwoofer to the AC 

power outlet.

F 

Connect audio output from other 

device (optional)

Use a red and white audio cables (not supplied) to 
connect the AUDIO IN-AUX1 or AUX2 sockets on the 
subwoofer to the AUDIO OUT sockets on the 
connected device (for example, DVD recorder, VCR, 
Cable/Satellite Box). 

Note  Press AUX/DI on the remote control to 
select ‘AUX1’ or ‘AUX2’ as the source you want to 
listen to.

Main Unit 
(rear)

Television 
(rear)

Subwoofer (rear)

DVD recorder/ 
VCR/ Cable/
Satellite Box

Subwoofer (rear)

Listening 
Position

Speakers Distance

FM antenna

AM/MW 
antenna

Main unit (rear)

RIGHT

SPEAKER

LEFT

SPEAKER

Subwoofer (rear)

or