Philips AJB7038D/10 ユーザーズマニュアル

12

EN

7  Other features

Set alarm timer

Set alarm

Note

 

•

Make sure that you have set the clock correctly.

 

•

You cannot set alarm in standby mode.

You can set two alarms.

1 

Press and hold AL1/AL2 for 3 seconds to 

activate alarm setting mode.

2 

Press SELECT to confirm.

 

»

The hour digits and alarm icon begin 

to blink.

3 

Press   /   repeatedly to set the hour.

4 

Press SELECT to confirm.

Repeat steps 3-4 to set the minute, select an 

alarm source, and volume.

 

»

When alarm time comes, the selected 

buzzer, DAB radio, FM radio, or iPod/

iPhone turns on.

Tip

 

•

If iPod/iPhone is selected, but no iPod/iPhone is 

connected, the device switches to buzzer source 

instead.

Activate/deactivate alarm timer

Press AL1/AL2 repeatedly to activate or 

deactivate the alarm timer.

 

»

 or   is displayed if alarm timer is 

on and disappears if it is off.

•  To stop the ringing alarm, press the 

corresponding AL1/AL2.

Snooze alarm

When alarm sounds, press SNOOZE 

repeatedly to choose the snooze time.

•  5 minutes

•  10 minutes

•  15 minutes

 

»

The alarm snoozes and repeats ringing 

5/10/15 minutes later if set.

Set sleep timer

This device can switch to standby mode 

automatically after a preset period.

Press SLEEP repeatedly to select the sleep 

timer period (in minutes).

 

»

When the sleep timer is activated,   

is displayed.

To deactivate the sleep timer, press SLEEP 

repeatedly until [Sleep off] (sleep off) is

displayed.

Play from an external device

You can also listen to an external audio device 

through this device.

1 

Press SOURCE to select the MP3 Link 

mode.

2 

Connect the MP3 link cable (not supplied)

to: 

•  the MP3-LINK socket (3 5mm) at the

back of the device.

•  the headphone socket of an external 

device.

3 

Start to play the device (see the user 

manual of the device).

  

LINE IN