Philips 20PFL5522D/05 ユーザーズマニュアル

English

•   Cables are often colour coded. Connect  
  red to red, white to white, etc.;
•  The labels for the component video 
  sockets may differ depending on the DVD  
  player connected. Although the 
  abbreviations may vary, the letters B and  
  R stand for the blue and red component  
  signals, respectively, and Y indicates the  
  luminance signal. Refer to the DVD    
  player’s instructions for use for 
  definitions and connection details;
•   To get an optimal viewing, it is advised to  
  switch your equipment to the highest 
  possible supported display modes.

If you notice scrolling images,
wrong colours or no colour, no picture, or 
even combinations of these on your screen, 
verify if the connections are done in the 
correct way and if the resolution and the 
signal standard of the connected equipment 
are set in the right way. See the user manual 
for your equipment.

•  Only digital output of the PC can be 
  connected via DVI to HDMI cable.
  VGA connection is not supported. 

•  Before connecting your PC to the TV,  
  select your PC monitor settings to a 
  refresh frequency of 60 Hz.

1

Use a DVI to HDMI cable to connect  

 

to one of the HDMI connectors of your  

 TV 

1 . 

2

Connect the audio cable to the PC’s  

 

AUDIO jack and to the  L/R AUDIO  

 jacks 

of 

TV 

  2  .

3

Press the 

 key on the remote 

 

control to display Source list. 

4

Press the ï key to select HDMI 1 or  

 and press the Æ/  

 key  

 

to confirm selection.

  640 x 480, 60 Hz 

800 x 600, 75 Hz

  640 x 480, 72 Hz 

800 x 600, 85 Hz

  640 x 480, 75 Hz 

1024 x 768, 60 Hz

  640 x 480, 85 Hz 

1024 x 768, 70 Hz

  800 x 600, 60 Hz 

1024 x 768, 75 Hz

  800 x 600, 72 Hz 

1024 x 768, 85 Hz

  PC resolutions for LCD TV. 
  Not applicable to 20” LCD TV 
 or 

  1280 x 768, 60 Hz
  1280 x 1024, 60 Hz
  1360 x 768, 60 Hz

1

2

HDMI

PC

DVI

Audio 

L/R

Connectors 

at side of TV

Connectors at rear of 

TV (facing downward)