Jacuzzi J-345 ユーザーズマニュアル

28

Your spa is equipped with five menus that allow you to program 

additional features. By continually pressing the Menu button you will 

cycle through the menus as follows (Figure 1):

A. 

Allows access to the programming menu for the primary filtration that 

uses the circulation pump, page 29. Although the spa has a default 

setting this feature is programmable. While in this menu, you can also 

program the Change Filter Timer.

B. 

Allows access to the programming menu for the secondary filtration 

that uses Jets Pump 1, page 32. These cycles are used to provide 

additional skimming. Although the spa has a default setting this feature is 

programmable.

C.  CLEAR

Allows access to the CLEAR

RAY® bulb replacement countdown timer, 

page 33. Your spa is equipped with the CLEAR

RAY system that uses 

a UV bulb to purify the water. This bulb must be replaced every year. 

By programming the countdown timer, a reminder is displayed on the 

topside when it is time to replace the bulb. The LED screen will flash 

between “blb” and the set temperature. Additionally, the CLEAR

RAY 

indicator light will blink, page 23. The timer needs to be reset in order 

to clear the message.

D. 

Allows access to the economy programming menu, page 33. The 

economy feature has either an “on” or “off” setting where the heater 

is allowed to activate for a maximum of 30 minutes at the end of each 

secondary filtration cycle.

E. 

Activates the locking modes to certain components, features or 

Current temperature (Main Menu)
Primary Filtration Menu

Secondary Filtration Menu

CLEAR

RAY/UV Menu

Economy Menu
Lock Menu

Figure 1