Multi-Tech Systems MVP-2410 ユーザーズマニュアル

304 

MultiVOIP software can be upgraded locally using a single command 

at the MultiVOIP Windows GUI, namely Upgrade Software.  This 

command downloads firmware (including the H.323 stack), and  

factory default settings from the controller PC to the MultiVOIP unit. 
When using the MultiVOIP Windows GUI, firmware and factory 

default settings can also be transferred from controller PC to MultiVOIP 

piecemeal using separate commands. 
When using the MultiVOIP web browser GUI to control/configure the 

voip remotely, upgrading of software must be done on a piecemeal 

basis using the FTP Server function of the MultiVOIP unit.  
When performing a piecemeal software upgrade (whether from the 

Windows GUI or web browser GUI), follow these steps in order: 

1.  Identify Current Firmware Version 
2.  Download Firmware  
3.  Download Factory Defaults 

 
When upgrading firmware, the software commands “Download 

Firmware,” and “Download Factory Defaults” must be implemented in 

order, else the upgrade is incomplete. 

Before implementing a MultiVOIP firmware upgrade, be sure to verify 

the firmware version currently loaded on it.  The firmware version 

appears in the MultiVoip Program menu.  Go to Start | Programs | 

MultiVOIP ____ x.xx.  The final expression, x.xx, is the firmware 

version number.  In the illustration below, the firmware version is 

4.00a, made for the E1 MultiVOIP (MVP3010). 

 

When a new firmware version is installed, the MultiVOIP software can 

be upgraded in one step using the Upgrade Software command, or 

piecemeal using the Download Firmware command and the  

Download Factory Defaults command.