Multi-Tech Systems MVP-2410 ユーザーズマニュアル

44 

7.  On the next screen you can select the COM port that the command 

PC will use when communicating with the MultiVoip unit. After 

software installation, the COM port can be re-set in the MultiVOIP 

Software (from the sidebar menu, select Connection | Settings to 

access the COM Port Setup screen or use the keyboard shortcut Ctrl 

+ G).  

 

NOTE:  If the COM port setting made 
here conflicts with the actual COM 
port resources available in the 
command PC, this error message will 
appear when the MultiVOIP program 
is launched.  If this occurs, you must 
reset the COM port.