Audiovox ce520 ユーザーガイド
MW/AM
LOOP
ANTENNA
LOOP
ANTENNA
The AC cord to an AC outlet
SYSTEM CONNECTIONS
2.
CONNECTION WITH OTHER OPTIONAL EQUIPMENT
To listen to or record audio signals from external
units through this unit.
Connect the red plug to the R jack, and the white
plug to the L jack to the AUX jack.
units through this unit.
Connect the red plug to the R jack, and the white
plug to the L jack to the AUX jack.
LISTENING TO THE CONNECTED EQUIPMENT
1. Press the FUNCTION button to AUX.
2. Play the external source.
1. Press the FUNCTION button to AUX.
2. Play the external source.
CD SECTION
To find a previous track
Press
Press
SKIP button once to return to
the beginning of the current track.
Press
Press
SKIP button repeatedly to skip
tracks backward one by one.
To skip tracks
Press
Press
SKIP button repeatedly to skip
track(s) forward one by one.
Keep it pressed
Press it once
NOTE :
The CD player may skip if the loud speakers are situated close to the player and if high volume or bass
levels are used.
The CD player may skip if the loud speakers are situated close to the player and if high volume or bass
levels are used.
Searching for the beginning of a track
Locating a particular point in a track
CD PLAYING
1. Press the CD button.
BACKWARD
FORWARD
2. Press the OPEN/CLOSE button to open CD door. Place
a disc in the CD tray with the label face front and then
press the OPEN/CLOSE button to close CD door. The
total number of tracks will show on the display.
press the OPEN/CLOSE button to close CD door. The
total number of tracks will show on the display.
NOTES:
• Do not push the CD door to close it.
• CD door cannot open while power is off.
• Do not push the CD door to close it.
• CD door cannot open while power is off.
3.
To start playing, press
PLAY/PAUSE
button.
TO INTERRUPT PLAYBACK
Press
Press
PLAY/PAUSE button.
The indicator will light up.
To resume playback, press
To resume playback, press
PLAY/PAUSE
button again.
TO STOP PLAYBACK
Press STOP button.
Press STOP button.
To move backward at high speed
Keep
SKIP button pressed during play
and release at the desired point.
To move forward at high speed
Keep
SKIP button pressed during play
and release at the desired point.
FORWARD
BACKWARD
PARTS IDENTIFICATION
1. MODE selector (BEAT CUT/FM
MODE/DUBBING)
2. PHONES jack
3. Cassette Deck A operation buttons
3. Cassette Deck A operation buttons
PAUSE button
STOP/EJECT button
F.FWD button
REW button
PLAY button
STOP/EJECT button
F.FWD button
REW button
PLAY button
4. Cassette Deck B operation buttons
PAUSE button
STOP/EJECT button
F.FWD button
REW button
PLAY button
REC button
STOP/EJECT button
F.FWD button
REW button
PLAY button
REC button
5. Cassette knob cover
6. Cassette Deck A door
7. CD door
8. POWER/STANDBY button
9.
6. Cassette Deck A door
7. CD door
8. POWER/STANDBY button
9.
CD PLAY/PAUSE button
10.
/
SKIP/TUNING buttons (UP/
DOWN)
11.
CD STOP button
12. PRESET/REPEAT button
13.
13.
MEMORY button
14. RANDOM button
15. REMOTE SENSOR
16. STANDBY indictor
17. X-BASS indicator
18. DISPLAY window
19. TUNER button
20. CD button
21. TAPE button
22. BAND button
23. X-BASS button
24. VOLUME (
15. REMOTE SENSOR
16. STANDBY indictor
17. X-BASS indicator
18. DISPLAY window
19. TUNER button
20. CD button
21. TAPE button
22. BAND button
23. X-BASS button
24. VOLUME (
/
)
25.
OPEN/CLOSE button
26. Cassette Deck B door
27. FM 75 ohm antena terminal
28. AM/MW antenna socket
29. AUX IN jack
30. AC cord
31. Speaker terminals
27. FM 75 ohm antena terminal
28. AM/MW antenna socket
29. AUX IN jack
30. AC cord
31. Speaker terminals
RANDOM PLAY
This function will allow a single track or all the tracks on the disc to be played repeatedly.
This function will allow a single track or all the tracks on the disc to be played repeatedly.
TURNING ON THE UNIT
TO TURN ON THE UNIT
Press POWER button, the display will illuminate. Select the desired function and the corresponding
function indicator will show in the display.
Press POWER button, the display will illuminate. Select the desired function and the corresponding
function indicator will show in the display.
TO TURN OFF THE UNIT
Press the POWER button to enter STANDBY. The display illumination will fade and only the clock
display will be shown.
Press the POWER button to enter STANDBY. The display illumination will fade and only the clock
display will be shown.
POWER INDICATOR
While the AC cord is connected and the unit is on stand-by, power will be consumed and only the
clock display will be lit.
clock display will be lit.
• Press the POWER button to turn on the unit.
After a short period of time the display will show:
• Press the TAPE button.
After a short period of time the display will show:
• Press the CD button.
After a short period of time the display will show:
• Press the AUX button (on remote control only).
After a short period of time the display will show:
• After using the unit press the POWER button until the display shows the time (at standby mode).
DISPLAY
Caution:
• Be sure the AC power cord is disconnected
• Be sure the AC power cord is disconnected
and all functions are off before making con-
nections.
nections.
• To prevent electrical shock, match wide
blade of plug to wide slot, fully insert. (FOR
N. America)
N. America)
1.
SPEAKER CORD CONNECTION
Connect the right speaker to the R terminal, and
the left to the L terminal.
Connect the wires with the printed white lines to the
red (+) terminals and the plain-black wires to the black
(-) terminals.
WARNING:
Connecting speakers other than the speakers
supplied with the unit may damage the unit.
the left to the L terminal.
Connect the wires with the printed white lines to the
red (+) terminals and the plain-black wires to the black
(-) terminals.
WARNING:
Connecting speakers other than the speakers
supplied with the unit may damage the unit.
2. Press the
PLAY/PAUSE button to start
play.
1. Press the RANDOM button, the word
"RANDOM" will appear on the display.
TIMER OPERATION (for remote control only)
The power can be turned on and off automatically at a preset time so that you can wake up to tape
music, CD, radio or AUX. Make sure the clock is set the correct before the timer setting.
music, CD, radio or AUX. Make sure the clock is set the correct before the timer setting.
TIMER SETTING - at standby mode
1. Press MODE/REMAIN button until
ON/OFF is in the display.
2. Press MEM
button in clock mode. Hour and minutes will flash.
3. Press
TUN +
buttons
to set correct hour.
4. Press
TUN -
buttons
to set the correct minutes.
5. Press MEM
button to store the ON/OFF time. It will return to normal mode.
Cancel the timer function
Press the SHIFT and TIMER button until the timer indicator turn off.
Press the SHIFT and TIMER button until the timer indicator turn off.
SLEEP SETTING (for remote control only)
When the sleep timer is used, the power is automatically turned off after the specified time passes.
When the sleep timer is used, the power is automatically turned off after the specified time passes.
1 . Press the SLEEP button while the power
is on. "SLEEP 90" lights in the display.
Note: SLEEP time can only be adjust in
TUNER, TAPE, CD and AUX modes.
Note: SLEEP time can only be adjust in
TUNER, TAPE, CD and AUX modes.
2. Press SLEEP button repeatedly to select
the length of remaining time until the unit
turns off.
It changes the indicator in the following way:
turns off.
It changes the indicator in the following way:
The sleep timer is set and the SLEEP indica-
tor lights in the display. Let go when required
sleep time (in minutes) is shown.
To cancel the sleep timer, press the SLEEP
button once and "SLEEP" will go out in the
display.
tor lights in the display. Let go when required
sleep time (in minutes) is shown.
To cancel the sleep timer, press the SLEEP
button once and "SLEEP" will go out in the
display.
PLAY TIMER
RECORD TIMER
1. Set the time of the timer-on and timer-off.
2. Select the desired program source with
2. Select the desired program source with
the FUNCTION.
TUNER: Select a band and station.
TAPE: Insert the cassette tape.
CD: Insert a disc.
TUNER: Select a band and station.
TAPE: Insert the cassette tape.
CD: Insert a disc.
3. Press TIMER.
TIMER appears in the display.
4. Press POWER to standby mode.
5. For cassette playback, press PLAY.
5. For cassette playback, press PLAY.
At the timer-on time, the system turns on
automatically.
automatically.
The system will record a radio broadcast
at a preset time.
at a preset time.
1. Set the time of the timer-on and timer-off.
2. Set to TUNER.
3. Select a band and station.
4. Insert the cassette tape for recording.
5. Press TIMER.
2. Set to TUNER.
3. Select a band and station.
4. Insert the cassette tape for recording.
5. Press TIMER.
TIMER appears in the display.
6. Press POWER to standby mode.
7. Press REC (record) which also engages
7. Press REC (record) which also engages
PLAY.
INTRODUCTION PLAY - - at CD stop mode (for remote control only)
TO CANCEL RANDOM PLAYBACK
1. Press the STOP button to stop random
playing.
2. Press the RANDOM button to deactivate ran-
dom playback.
Press the SHIFT & INTRO button, the word "INTRO" will appear on the display.
REPEAT PLAY
This function will allow a single track or all the tracks on the disc to be played repeatedly.
This function will allow a single track or all the tracks on the disc to be played repeatedly.
TO REPEAT THE SAME TRACK
Press the REPEAT button to repeat the cur-
rent track. The "REPEAT 1" indicator light up.
Press the REPEAT button to repeat the cur-
rent track. The "REPEAT 1" indicator light up.
TO REPEAT THE WHOLE DISC
Press the REPEAT button until the "REPEAT
ALL" indicator light up.
Press the REPEAT button until the "REPEAT
ALL" indicator light up.
TO CANCEL REPEAT PLAY
Press REPEAT button until the REPEAT indicator turn off.
Press REPEAT button until the REPEAT indicator turn off.
DURING STOP MODE
The REPEAT operations can also be set in the
stop mode. The player will start playing from
Track 1 of the currently selected disc after
PLAY/PAUSE button is pressed.
stop mode. The player will start playing from
Track 1 of the currently selected disc after
PLAY/PAUSE button is pressed.
The REPEAT operations can also be set from
paused playback point. The player will start play-
ing again after
paused playback point. The player will start play-
ing again after
PLAY/PAUSE button is
pressed.
DURING PAUSE MODE
STOPPING AND CANCELLING PROGRAMMED PLAYBACK
To stop programmed play for a moment:
• Press the
• Press the
PLAY/PAUSE button and "II" will be displayed.
Press this button again to resume playing.
To stop programed playback:
• Press the STOP button.
• Press the STOP button.
To erase the whole programme:
• Press the STOP button or select another
• Press the STOP button or select another
function.
or
Open the disc tray by pressing the OPEN/
CLOSE button.
Open the disc tray by pressing the OPEN/
CLOSE button.
Up to 20 tracks can be programmed to play in any order using this function.
PROGRAMMING PLAYBACK --- in the stop mode
repeat step 2 to 3.
5. To start playback, press the
PLAY/PAUSE
button.
1. Press MEMORY button (in stop mode).
2 . Press
SKIP
button to select the desired track.
3. Press
MEMORY button again to store this track in memory.
4. To program additional tracks,
NOTE:
During programme playback, the
During programme playback, the
SKIP
buttons can only be used for the selected
t r a c k s .
TO CANCEL INTRODUCTION PLAY
Press the STOP button to stop introduction play.
Press the STOP button to stop introduction play.
ADJUSTING THE SOUND
Press
button
to decrease the
volume.
volume.
Press
button
to increase the
volume.
volume.
Press X-BASS button
to increased the low
frequency sound level.
to increased the low
frequency sound level.
To adjust the volume
For loud deep bass
WHEN RECORDING
Adjustments to the VOLUME control or the X-BASS control will not affect the recording.
Adjustments to the VOLUME control or the X-BASS control will not affect the recording.
FOR PRIVATE LISTENING
Connect a headphone (ø3.5mm stereo mini-plug) to the PHONES jack.
When the headphone is connected, speakers are automatically disconnected.
Connect a headphone (ø3.5mm stereo mini-plug) to the PHONES jack.
When the headphone is connected, speakers are automatically disconnected.
CLOCK SETTING -
in standby mode
1.
Press
MEMORY button the Hour and
Minutes will flash.
2.
Press
SKIP/TUNING (
DOWN )
but-
ton to set hour.
3.
Press
SKIP/TUNING (
UP )
button to
set minutes.
4.
Press
MEMORY button to set hour and
minutes, start the clock.
Note: If a button is not pressed for 10 seconds the clock set mode will be exited automatically.
TUNER
RANDOM
INTRO
MEMORY
➊
➋
➌
➍
➎
27
28
29
31
30
4
3
1
2
2
11
5
6
7
8
9
10
12
13
14
15
14
15
16
17
18
18
26
23
24
25
22
21
20
19
POWER ON
STANDBY
TAPE
CD
VOL
MEMORY
MEMORY
UP
SKIP/ TUNING
DOWN
UP
SKIP/ TUNING
DOWN
OPEN/CLOSE
MEMORY
UP
SKIP/ TUNING
DOWN
MEMORY
CD
OPEN/CLOSE
UP
SKIP/ TUNING
DOWN
UP
SKIP/ TUNING
DOWN
PRESET/
PRESET/
PRESET/
3.
MW/AM LOOP ANTENNA CONNECTION
Do not connect to an outside antenna.
Connect the supplied MW/AM loop antenna to
receive better MW/AM broadcast signal.
Connect the supplied MW/AM loop antenna to
receive better MW/AM broadcast signal.
4.
FM ANTENNA WIRE
Do not connect to an outside antenna.
5.
POWER CORD CONNECTION
Before use, check that the rated voltage of your
unit matches your local voltage.
Connect the AC cord to an AC outlet.
The STANDBY indicator will light up and the clock
will be displayed.
unit matches your local voltage.
Connect the AC cord to an AC outlet.
The STANDBY indicator will light up and the clock
will be displayed.
TUNER
TIMER
MEMORY
1
2 3
7
6
8
10
9
11
12
5
4
13
1. X-BASS indicator
2. CD function indicator
3. BAND FM/MW(AM) indicator
4. REPEAT mode indicators
5. PLAY / PAUSE indicators
6. MEMORY indicator
7. FM STEREO indicator
8. CD RANDOM indicator
2. CD function indicator
3. BAND FM/MW(AM) indicator
4. REPEAT mode indicators
5. PLAY / PAUSE indicators
6. MEMORY indicator
7. FM STEREO indicator
8. CD RANDOM indicator
9. TUNER function Indicator
10. INTRODUCTION indicator
11. TIMER ON/OFF indicators
12. SLEEP indicator
13. CLOCK/CD TIMING/TAPE/AUX/TUNER FRE-
10. INTRODUCTION indicator
11. TIMER ON/OFF indicators
12. SLEEP indicator
13. CLOCK/CD TIMING/TAPE/AUX/TUNER FRE-
QUENCY/CD TRACK/PRESET STATION
NUMBER indicators
NUMBER indicators
RANDOM
RANDOM