Fujitsu M4099D 参照ガイド
2-5
Wipe the metal roller surfaces
(lower transport unit side) while
turning the shaft by hand.
(lower transport unit side) while
turning the shaft by hand.
Apply isopropyl alcohol or cleaner
F1 to cloth.
F1 to cloth.
Allow to dry.
Open the upper transport unit.
Allow to dry.
Moisten a cloth with cleaner F2.
Open the upper transport unit.
Wipe the pick roller unit, brake roller
and the upper and lower
transport unit rollers.
and the upper and lower
transport unit rollers.
WARNING
Do not use cleaner F2
on rubber rollers.
on rubber rollers.
Metal rollers (hidden,
lower transport unit side)
lower transport unit side)
Rollers (hidden, upper
transport unit side)
transport unit side)
Brake roller (hidden)
Pick roller unit
Metal roller
■
Cleaning the Rollers with Dry Cloth, Isopropyl Alcohol or Cleaner F1
■
Cleaning the Metal Rollers with Cleaner F2
Rollers
Pick roller unit
Brake roller (hidden)
Cloth
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Scanner wieder anschalten.
Rollers
Metal rollers