Fujitsu M4099D 参照ガイド
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
2-16
Back-Side Lamp
Remove the connector of the
back-side lamp unit.
back-side lamp unit.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Rotate the lamp a half turn so that
the two terminals on each end
align with the slot on the lamp
socket and remove the lamp from
the back-side lamp unit.
the two terminals on each end
align with the slot on the lamp
socket and remove the lamp from
the back-side lamp unit.
Pull and open the side cover.
Pull out the back-side lamp unit
toward the right.
toward the right.
Back-side lamp unit (inside)
Side cover
Lamp
Rail
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Scanner wieder anschalten.