Toshiba 42XV545U ユーザーガイド
49
XV545U (E/F) Web 177.8:228.6
Chapter 6: Using the TV’s features
Using the FREEZE feature
To use the FREEZE feature:
1
When viewing the TV, press B to make the picture
a still picture.
a still picture.
2
To return to the moving picture, press B again (or
any other button).
any other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from the
following modes, as described below.
following modes, as described below.
Note:
• PC mode is available for HDMI and PC inputs only (grayed
• PC mode is available for HDMI and PC inputs only (grayed
out for other input sources).
• PC Fine mode is only available when on an HDMI input with
Enable REGZA LINK set to On and a Toshiba REGZA LINK
PC connected (
PC connected (
- page 61).
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, most items in the Picture Settings and Advanced
Picture Settings menus are grayed out when it is selected.
content, most items in the Picture Settings and Advanced
Picture Settings menus are grayed out when it is selected.
1
From the Video menu, highlight Mode and press T.
2
Press B or b to select the picture mode you prefer
and press T.
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
input only. You can select a different picture mode for
each input.
Adjusting the picture quality
You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to
your personal preferences.
DynaLight™, Brightness, Color, Tint, and Sharpness) to
your personal preferences.
* Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
** DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
areas in the video according to the level of darkness.
To adjust the picture quality:
1
From the Video menu, highlight Picture Settings
and press T.
and press T.
2
Press B or b to select the picture quality you want to
adjust (Contrast, Backlight, DynaLight,
Brightness
adjust (Contrast, Backlight, DynaLight,
Brightness
, Color, Tint, or Sharpness), and then
press C or c to adjust the setting, as described in the
table above.
table above.
3
To save the new settings, highlight Done and press
T.
You can use any of the picture modes (- “Selecting
the picture mode,” above left) as a starting point for
adjusting the picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight Reset
and press T.
You can use any of the picture modes (- “Selecting
the picture mode,” above left) as a starting point for
adjusting the picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight Reset
and press T.
The picture qualities you adjusted are automatically
saved in the Preference mode (- “Selecting the picture
mode,” above left) until Reset is selected.
saved in the Preference mode (- “Selecting the picture
mode,” above left) until Reset is selected.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.
Mode
Picture Quality
AutoView
Automatically adjusts picture settings
based on ambient light conditions and
input signal content
based on ambient light conditions and
input signal content
Sports
Bright and dynamic picture
Standard
Standard picture settings
Movie
Lower contrast for darkened room
PC
Designed for viewing of PC tables and
documents
documents
PC Fine
Designed for viewing of media from a
Toshiba REGZA LINK PC.
Toshiba REGZA LINK PC.
Preference
Your personal preferences
Selection
Pressing
C
Pressing
c
Contrast
lower
higher
Backlight*
darker
lighter
DynaLight**
On/Off
On/Off
Brightness
darker
lighter
Color
paler
deeper
Tint
reddish
greenish
Sharpness
softer
sharper
52XV545U_EN.book Page 49 Monday, August 4, 2008 10:54 AM