Aiptek 2 インストール手順
System Requirements
Specifications
Operating Environment
Microsoft Windows XP/ 98 / ME / 2000
Pentinum 200 MHz (or equivalent) processor or higher
32 MB of RAM (64 MB recommended)
Video card with 2 MB of RAM for minimum 16 bit (High Color) display
4X speed CD-ROM
An available USB port
Pentinum 200 MHz (or equivalent) processor or higher
32 MB of RAM (64 MB recommended)
Video card with 2 MB of RAM for minimum 16 bit (High Color) display
4X speed CD-ROM
An available USB port
: Color VGA(640x480)CMOS image sensor
:
9 fps for QVGA(320x240 Pixels)
3 fps for VGA(640x480 Pixels)
3 fps for VGA(640x480 Pixels)
(SDRAM 64Mbit):
26 Picture for VGA
,
107Pictures for QVGA
:5.6 " x1.35 "x1 "
: AAA1.5V x2 battery
: 54 Degrees
: USB Port
: Microsoft Windows XP/ 98/ME/2000
Sensor type
Iamge Performance for Video Stream
Iamge Performance for Video Stream
Memory & Images
Dimension
Battery
Lens view angle
Interface type
Software Support
Battery
Lens view angle
Interface type
Software Support
(640x480 Pixels)
(320x240 Pixels)
The camera should be operated only within the following environmental
conditions:
PenCam Cautions!
41-104 Fahrenheit; 5-40 Celsius
20% - 85% relative humidity, non-condensing
20% - 85% relative humidity, non-condensing
Never immerse any part of the PenCam or its components into any fluid or liquid.
Disconnect the PenCam from your computer before cleaning it.
Remove dust or stains with a soft cloth dampened with water or neutral detergent.
Disconnect the PenCam from your computer before cleaning it.
Remove dust or stains with a soft cloth dampened with water or neutral detergent.
Do not use any volatile chemicals or liquids such as thinner or benzene to clean the
PenCam.
Do not place hot items on the surface of the PenCam.
Do not attempt to disassemble the PenCam.
Do not attempt to disassemble the PenCam.
.. 6 ..