Soleus sg-wac-12hce ユーザーズマニュアル

 9 

7.  Attach foam adhesive seal along the bottom of the cur-

tain bottom channel. FIG 9 

1.  Open the window and place the cabinet in the middle 

of the window sill.  

2.  Make sure the bottom rail is seated over the window 

sill as shown below. Bring the window down temporar-
ily behind the top angle rail to hold the cabinet in place. 

3.  Fasten cabinet to window sill (B) using three #10 x 1/2” 

pan-head Phillips screws (A). Pre-drill holes if needed. 

 
1.  Place the air conditioner on a hard flat surface. 
2.  Locate the foam gasket and top angle rail 
3.  Attach the foam gasket to the top angle. 
4.  Install top angle side to cabinet rail using the #10 3/8” 

Pan Head Phillips screws as shown in FIG 7. 

5.  Insert top and then bottom of right-hand curtain into the 

top and angle rails on the cabinet. 

Extend right-hand curtain outward to insert the #10 x 
1/4” pan-head Phillips screw, screw curtain into middle 
hole of the cabinet. Repeat for left side. FIG 8 

SILL 

STOOL 
ANGLE