Motorola DCT2000 ユーザーガイド
1 6
BASIC OPERA TI ON
Turning Power On and Off
Press
POWER
on the front panel to turn the DCT 2000 on or off. If using the
remote control, be sure it is in cable mode by pressing
CABLE
, and then press
POWER
.
Changing Channels
You can change channels in two ways:
•
Press
CHANNEL
▲ or ▼ on the front panel of the DCT 2000, or
press
CHANNEL
+ or - on the remote control to step through the
channel selection.
•
Enter the number of the channel you want to tune using the numeric
keys on the remote control.
keys on the remote control.
Adjusting the Volume
Press
VOLUME
+ or – on the remote control to adjust the volume. When
you adjust the volume, the volume scale is displayed on the screen.
Press
Press
MUTE
on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the DCT 2000 to
approximately ¾ of the maximum volume level and then adjust the audio
levels on the external devices.
approximately ¾ of the maximum volume level and then adjust the audio
levels on the external devices.