Motorola hmvc3020 クイック設定ガイド
4
Installing Your Wireless Signal Repeater
Warning: When mounting near a window, drilling too close to the glass could break the glass, possibly cause
it to shatter, and cause injury. The window extends deeper into the frame than can be seen; therefore, ensure
your screw is beyond the glass before drilling.
it to shatter, and cause injury. The window extends deeper into the frame than can be seen; therefore, ensure
your screw is beyond the glass before drilling.
1
Using the holes on the drilling template found later in this guide, mark the
position of the holes to be drilled.
position of the holes to be drilled.
For drywall or other composite surfaces, use a 7/32" drill bit. Drill a hole for
each of the mounting screws and insert a plastic wall anchor into each hole.
each of the mounting screws and insert a plastic wall anchor into each hole.
For solid surfaces, use a 1/16" drill bit. Drill a pilot hole for each of the
mounting screws.
mounting screws.
1.6 mm (1/16 inch)
maximum
2
. Slide the camera down on to
the bracket until it is firmly seated and
Using the screws provided, secure the camera mounting bracket to the wall
you feel it click as the clip engages.
Position the camera to view the desired area. Please keep
3
in mind that the field of view is 80 degrees and
4
Make adjustments to the camera viewing angle by tilting and panning the camera head with your hand.
motion sensor distance works up to 12–14 feet (3.5–4 m).