Marantz bd8002 ユーザーガイド
13
ENGLISH
SVENSKA
ITALIANO
ESPAÑOL
DEUTSCH
NEDERLANDS
FRANÇAIS
*
1
For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital
when all the conditions listed below are met:
when all the conditions listed below are met:
• When “BD Audio Mode” is set to “Mix Audio Output”.
• When “HDMI Audio Out” is set to “Audio Mute”.
• When “Digital Out” is set to “Bitstream”.
If the BD title does not have secondary or interactive audio, the audio will be output as shown in the
table.
*
• When “HDMI Audio Out” is set to “Audio Mute”.
• When “Digital Out” is set to “Bitstream”.
If the BD title does not have secondary or interactive audio, the audio will be output as shown in the
table.
*
2
In order to output LPCM signal from DIGITAL OUT jack, set “BD Audio Mode” to “Mix Audio
Output”. (Bitstream signal will be output when “HD Audio Output” is selected.) Refer to page 24
and 33.
Output”. (Bitstream signal will be output when “HD Audio Output” is selected.) Refer to page 24
and 33.
Analogue 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
Disc type
Audio recording format
BD-video
2ch Downmix LPCM
2ch Downmix LPCM*
2
2ch Downmix LPCM*
2
DTS*
1
2ch Downmix LPCM
DTS*
1
2ch Downmix LPCM*
2
2ch Downmix LPCM*
1
2ch Downmix LPCM
BD-RE/-R
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
DVD-video
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
MPEG
MPEG
2ch Downmix LPCM
2ch Downmix LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch Downmix LPCM
Note for Optical Cable
• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 15cm (6 inches) or more when storing them.
• Use a cable which is 3m (9.8 feet) or shorter.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.
Cables not included.
Please purchase the necessary cables at your local store.
Please purchase the necessary cables at your local store.
Connection to a Device with 2-channels of Analogue Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA audio cable (L/R) x 1
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to
page 34). For software recorded in multi-channel, analogue signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
page 34). For software recorded in multi-channel, analogue signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
Surround Connections to a Device with 7.1/5.1-channels of Analogue Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
R
L
AUDIO IN
RCA audio cable
Stereo component
this unit
audio
R
SURROUND
L
CENTER
SUB-
WOOFER
R
SURROUND
BACK
L
R
L
FRONT
AV amplifier
this unit
audio
E5J30ED_EN.book Page 13 Wednesday, October 15, 2008 9:32 PM