Marantz AV8003 ユーザーガイド

ENGLISH

@1  AUDIO IN/OUT (TV, DVD, VCR1, 

These are the analog audio inputs and outputs. 
There are 6 audio inputs and 4 audio outputs. The 
audio jacks are nominally labeled for cassette tape 
decks, compact disc players, DVD players and etc.... 
The audio inputs and outputs require RCA-type 
connectors.

@2  DIGITAL INPUT (Dig.1 - 6) / 

These are the digital audio inputs and outputs. There 
are 3 digital inputs with coaxial jacks, 3 with optical 
jacks. 
The inputs accept digital audio signals from a CD,  
DVD, or other digital source component. 
For digital output, there is 1 coaxial output and 1 
optical output. 
The digital outputs can be connected to MD recorders, 
CD recorders, or other similar components.

@3  VIDEO IN/OUT 

These are the video inputs and outputs. There 
are 4 video inputs and 2 video outputs and each 
one includes both composite video and S-video 
confi gurations. Connect VCRs, DVD players, and 
other video components to the video inputs. 
The 2 video output channels can be used to be 
connected to video tape recorders for making 
recordings.

@4  HDMI INPUT / OUTPUT

This unit has 4 HDMI inputs and 2 HDMI output. The 
input function can be selected from the OSD menu 
system. (See page 23)

A

B

C

D

A  Mode display area

Home: 
This is displayed during Home mode.

Device Name: 
This displays the device mode name that is currently 
active.
This area is always highlighted.

B  Command display area

This displays the information that has been set for the 
display items in the device modes.

C Battery 

This displays the remaining battery power.

D  Sub info. Area

Normal operation:
The page number that has been set for the respective 
mode is displayed.

When sending IR command:
The command name that has been set for the 
respective button is highlighted.

Operation when not sending an IR command 
(such as jump operation): 
The operation name that has been set for the button 
is displayed normally (not highlighted).

The provided remote controller is a universal remote 
controller. The POWER button, numeric buttons and 
control buttons are used in common across different 
input source components.
You can use the Wizz.it3 editing software to select 
your favorite settings for the buttons and pages of the 
remote controller.

z
x
c

v

v

b
n

.

.

m
,

⁄0

z  POWER ON and OFF buttons

These buttons are used when controlling devices 
that have been set with separately powered on and 
off remote commands.

x  SOURCE ON/OFF button

This button is used when controlling devices that 
have been set with a single power on/off remote 
command.

c LCD 

Remote controller display

v  Programmable soft buttons

These buttons are used by the Wizz.it 3 editor 
software to make LCD display and button operation 
settings.
These buttons are also used to adjust the number of 
pages for each device.

b Page 

These buttons are used when scrolling pages in 
Home mode and the device modes.

n Home 

This button is used to select Home mode.
To select a device that will be controlled, fi rst select 
Home mode, then select the device.

m Light 

This button is used to turn on the backlight for the 
buttons and LCD.

,  Cursor, ENTER buttons

.  Programmable Hard buttons

These buttons are used by the Wizz.it 3 editor 
software to make the remote controller command 
settings for learning and macro operations.

⁄0 USB 

This port is used to connect the remote controller and 
a PC with the supplied USB cable to enable editing 
with the Wizz.it 3 editor software.

AV8003N.indb   8

AV8003N.indb   8

08.4.28   10:49:11 AM

08.4.28   10:49:11 AM