Marantz vp12s2 ユーザーズマニュアル
ENGLISH
8
❖
When making connections be sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the plug properly. Any plugs that are not fully inserted often generate a noise.
• Use the proper cables for each connection.
• Insert the plug properly. Any plugs that are not fully inserted often generate a noise.
❖
When pulling out a cable:
• Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of
the projector.
The STANDBY indicator lights up and the projector goes into
the standby mode.
the projector.
The STANDBY indicator lights up and the projector goes into
the standby mode.
Note :
Make sure the AC power cord is firmly connected into
the AC IN socket.
You can connect this projector to a VCR, DVD player and other video equipment.
Connecting a video source using S-VIDEO IN and VIDEO IN terminals.
1.
Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video cable to the VIDEO IN terminal on the projector.
2.
Connect the other end of the S-video cable or the video cable to the S-video output terminal or video output terminal of the
video source.
video source.
Connecting with DVD player using COMPONENT VIDEO IN terminal
1.
Connect each RCA connector of a component cable to the corresponding RCA terminals on the projector.
2.
Connect the other end of the cable to the corresponding terminals on a DVD player.
DVD
VCR
FL OFF
STANDBY
S-VIDEO OUT
VIDEO OUT
COMPONENT VIDEO OUT
Component cable
(commercially available)
Video cable
(commercially available)
S-video cable (commercially available)
Connection with Video Equipments
Connection with AC Power Supply
CONNECTION