Marantz vp12s2 ユーザーズマニュアル

❖

• Texas Instruments DLP

TM

(Digital Light Processing)

Technology

• 1280 x 720 DMD

TM

Panel

• 16 : 9 Aspect Ratio

• Custom Optics Developed by Minolta

• 2600 : 1 Contrast Ratio

• 700 ANSI Lumens Brightness

• Brightness Uniformity : 90 %

• No Halo Effect

• Lens Up/Down Shift Construction

• Dust Free Optics Sealing

• No Light Leakage 

(Double Seals Cabinet Structure)

• Extremely Quite 

(Noise Cancel Duct Construction,

Ceiling Color Wheel Motor)

• Long Life Lamp 

(Average 2000 Hours)

• Double Shrink Seal Lamp Structure Minimizes

Burst Ratio

❖

• Full Digital Device

• 3 Faroudja Chips Inside 

(Decoder, Doubler, and

Enhancer)

• 3-2 Pull Down

• 10-Bit Digital Gamma Processing

• Horizontal/Vertical Keystone Correction

• 480p, 720p,1080i adapted

• Four Picture Modes: Theater, Standard, Dynamic,

User

• Twelve Picture Memories

• 4 Aspect Modes

• Fine Menu

• Three Color Temperatures (5250K/6500K/9000K)

• Black Level Selection (0IRE/7.5IRE)

• Control through RS-232C

• Two trigger for powered Screen Control

• Ecology Lamp Mode

• Component Video Input

–

and 

are trademarks

of Texas Instruments.

–

is a trademark of Faroudja, a division of Sage Inc.

– All trademarked product names mentioned in this manual

are the property of their respective companies.

DMD

TM

(Digital Micromirror Device

TM

) is one of the most

advanced technologies for consumer products. The DMD

TM

made by high precision technology, however some pixel
defects may be found on the projected image. We are
trying our best to control the quality in order to reduce the
number of defective pixels. It is almost impossible to have
zero pixel defects, even using the most advanced
technology. This is not a problem only for Marantz, but all
DLP

TM

projector manufactures. Therefore we have to note

that the warranty does not cover the DMD

TM

for pixel

defects. We appreciate your understandings.

SHP lamp is one of the most advanced technologies for
consumer products. The lamp made by high precision
technology, however some lamps might be failing before it
reaches its life. And projector’s brightness is getting darker
along with accumulated lamp usage hours. We are trying
our best to control the quality in order to reduce lamp
failures. It is almost impossible to have zero failure, even
using the most advanced technology. This is not a problem
only for Marantz, but all projector manufactures. Therefore
we have to note that the warranty does not cover the SHP
lamp for lamp failures: explosion, and non-lighting except
initial use. And also we have to note that the warranty does
not cover the SHP lamp for lamp failures: flickering, and
getting darker along with accumulated lamp usage hours.
We appreciate your understandings.