Zhone 6350-a4 インストール手順

6350-A2-ZN12-30

7

CONNECT TO PC OR ETHERNET HUB. Use an 8-pin Ethernet cable (crossover or 

straight-through) for the Ethernet connection. Insert one end of the cable into the jack 

labeled ETHERNET. 

Connect to one of the following:
— PC. Use an Ethernet crossover cable 

and connect the other end to a PC with 

an Ethernet Network Interface Card 

(NIC) installed.

– or –

— Ethernet Hub. Use an Ethernet crossover 

cable and connect the other end to an 

Ethernet hub’s Uplink port. (To connect to 

a hub’s standard port, use an Ethernet 

straight-through cable).

CONNECT TO POWER. Insert the supplied 

power cord’s round end into the jack labeled POWER. Plug the 

transformer into an AC outlet.
When the power cord is installed, the ReachDSL modem goes 

through a power-on self-test.

The ReachDSL modem hardware installation is now complete. 

For more information about the Hotwire DSL systems, visit www.zhone.com. 

ETHERNET

PC with Ethernet

Network Interface

Card

Ethernet

Crossover

Cable

ETHERNET

Ethernet

Crossover

Cable

Ethernet

Hub

8

7

6

5

4

3

2

1

POWER

Transformer