Jet 211000 2ss-1c-10 - 2-ton capacity 10-ft 1-phase electric chain hoist 仕様ガイド
Plastic Utility Carts
Models PUC-3117 and PUC-3725
• Review all instructions before assembling the cart.
• Improper assembly can cause personal injury and/or property damage.
• Maximum load is 550 lbs. distributed evenly. Do not overload cart.
• Do not step into or on the cart, or use it as a toy.
To assemble the cart, follow the illustrations below. You will need a cross-point screwdriver and a rubber
or wood mallet. Use the mallet to tap down the parts to ensure they are seated properly before fastening
them with screws. (NOTE: Numerals refer to parts list on reverse side of this sheet.)
To assemble the cart, follow the illustrations below. You will need a cross-point screwdriver and a rubber
or wood mallet. Use the mallet to tap down the parts to ensure they are seated properly before fastening
them with screws. (NOTE: Numerals refer to parts list on reverse side of this sheet.)
WALTER MEIER (Manufacturing) Inc.
427 New Sanford Road
LaVergne, Tennesseee 37086
LaVergne, Tennesseee 37086
Part No. M-140018
Ph.: 800-274-6848
Revision A1 06/2012
www.waltermeier.com
Copyright © 2012 Walter Meier (Manufacturing) Inc.