Krown pv20 plus ユーザーガイド
28
USING YOUR PV20 PLUS WITH WIRELESS PHONE (CONT.)
USING YOUR PV20 PLUS WITH A CORDLESS PHONE
You can connect your PV20 Plus to a cordless phone with a 2.5mm headset jack, and enjoy the
freedom of making a call around the house. Charge the cordless phone and PV20 Plus at night to get
them ready to use next day.
You can connect your PV20 Plus to a cordless phone with a 2.5mm headset jack, and enjoy the
freedom of making a call around the house. Charge the cordless phone and PV20 Plus at night to get
them ready to use next day.
Making a cordless phone call with your TDD.
1. Connect the PV20 Plus to the cordless phone using the
2.5mm audible cable.
2. Turn on your PV20 Plus
3. Press ON or TALK button on your cordless phone and
watch “Phone” light on your TDD to make sure you get
a dial tone.
4. Dial number on your cordless phone.
5. If the other TDD or Relay agent picks up your call, your
PV20 Plus will display text message and the
communication link has begun.
TROUBLESHOOTING FOR TDD-WIRELESS CALL
There are many new technology that has been used to establish the wireless communication link
between your and the other TDD users, you will get some problems sometimes by many causes.
There are many new technology that has been used to establish the wireless communication link
between your and the other TDD users, you will get some problems sometimes by many causes.
Garbled Text: It may be caused by lost, damaged or late signals sending through the air to the
receiver. It happens with any wireless call, even non-TDD calls, and mainly caused
by nature. Move your TDD and wireless phone to where you can receive a strong
signal. If you use a cordless phone refer to your owner’s manual to know how to
switch channel or move closer to the base to strengthen the signal. Always check
to make sure you have a good connection from the cable to the TDD and the
wireless phone.
receiver. It happens with any wireless call, even non-TDD calls, and mainly caused
by nature. Move your TDD and wireless phone to where you can receive a strong
signal. If you use a cordless phone refer to your owner’s manual to know how to
switch channel or move closer to the base to strengthen the signal. Always check
to make sure you have a good connection from the cable to the TDD and the
wireless phone.
“Drop Call”: It happen sometimes when you are moving between 2 call towers or in valleys,
hills, and tunnels. Try to redial when you have a stronger signal from your
cell phone.
hills, and tunnels. Try to redial when you have a stronger signal from your
cell phone.
Feedback: If you see your “Phone” light on your TDD on constantly, your PV20 Plus is getting
feedback. You may reduce the volume of your cell phone or cordless phone down
until the red light turns off and then increase it for better receiving.
feedback. You may reduce the volume of your cell phone or cordless phone down
until the red light turns off and then increase it for better receiving.
26