Thetford 9162 インストール手順

•

Never bend, drop, drill, weld, manipulate, or hammer the refrigerant system. Doing so can cause the system to
rupture, releasing chemicals that can irritate eyes and skin.

•

This refrigerator has sharp edges and corners at the rear. Use care when working on this refrigerator. To prevent
cuts or abrasions, wear cut resistant gloves.

•

The refrigerator must be installed on a solid and level floor away from heat generating sources. The floor must
be strong enough to support the combined weight of the refrigerator and its food load.

•

Never install the refrigerator directly on carpeting. To protect carpeting, the refrigerator must be placed on a
metal or wood panel extending at least the full width and depth of the refrigerator.

•

When discarding an appliance, remove all doors to prevent accidental entrapment and suffocation.

•

Never bypass or alter the refrigerator’s electrical components or features.

•

Follow Norcold’s Ventilation and Installation recommendations explicitly. Installation must assure complete
isolation of the living space of the vehicle from the refrigerator’s combustions system. Inspect foam strip around
refrigerator before installing. Replace if necessary.

•

Keep the refrigerator and the surrounding area clear and free of combustible materials, gasoline, and other
flammable vapors and liquids.

•

A circuit overload can result in an electrical fire when undersized wires or improperly sized fuses are used. To
prevent a possible electrical fire, follow ANSI A119.2 Standards, Norcold’s wire and fuse specifications, or
applicable state and local codes.

•

Use two wrenches when manipulating the gas inlet fitting. Failure to use two wrenches can over stress the tubing
and create gas leaks.

•

Combustion and ventilation vents must be installed as directed in this manual without modification.

This refrigerator is designed to operate with the following energy sources:

LP Gas Operation 11 inches Water Column Propane

12 volts DC control voltage (15.4 volts max. - 10.5 volts min.)

120 volts AC voltage (132 volts max. - 108 volts min)
12 volts DC control voltage (15.4 volts max. - 10.5 volts min.)

DC Operation 

12 volts DC (15.4 volts max. - 11.5 volts min.)

Operation where these specifications are exceeded can damage the refrigerator’s electrical circuit and its related

components and will void the refrigerator’s warranty.

This appliance is certified under the latest edition of ANSI Z21.19 by The American Gas Association (A.G.A.)

and is approved by the Canadian Gas Association (CGA).

Installation must be made in accordance with these standards and with the following installation instructions for

Norcold’s factory warranty to be in effect.

Installation must conform with local codes, or in the absence of local codes, with the following standards as

applicable.

In the United States:

a. National Fuel Gas Code, ANSI Z223.1.

b. Manufactured Home Construction and Safety Standard, Title 24 CFR,

Part 32-80.

c. Standard for Recreational Vehicles, ANSI A119.2 latest edition.

When an external electrical energy source is utilized, the refrigerator must be electrically grounded in accordance

with local codes, or in the absence of local codes, the National Electrical Code, ANSI/NFPA 70.