Bizfon 680 ユーザーガイド

4

The Bizfon 680 includes a mounting bracket to attach the unit 
to a wall. 

To mount your Bizfon 680 to a wall, follow these steps:

1. Find a location for the Bizfon 680(s) within four feet of an 

electrical outlet or power strip. 

Bizfon recommends that you connect the unit(s) 
to an uninterruptible power supply (UPS).

2. Attach the bracket to the wall.

A. Refer to the following figure for proper positioning of 

the bracket and mark four positioning holes on the wall 
where you will install the Bizfon 680.

B. Attach the bracket to the wall vertically, using the 

enclosed screws, or screws and drywall anchors, as 
appropriate for the type of wall on which you are 
mounting the Bizfon 680. 

When using the anchors on drywall, pre-drill a 3/16” 
pilot hole. When using the anchors on concrete, pre-drill 
a 1/4” pilot hole.

3. Lock the Bizfon into place on the bracket by positioning it 

over the bracket and sliding it down onto the tabs of the 
bracket as shown in the following figures.

Note orientation
of bracket