Bizfon 680 ユーザーガイド
Appendix A Professional Installation Guide
74
Bizfon , Inc.
NOTE: If you have not yet set up the extension, you must
press
before you can access settings.
4. Dial extension 200 and enter the password if required.
5. Press
.
6. Press
.
The announcement tells you the status of the cluster.
7. Press the keypad number associated with the number of the
unit you want to add to the cluster.
8. Press the blue button on the added unit when prompted.
9. Repeat steps 7 and 8 until you have configured the entire
cluster.
10. Press
when prompted.
11. Connect the expansion cables to the added units.
The cable connects from the OUT port of one unit to the IN
port of the other.
port of the other.
Removing Units from an Existing Multibox
Installation
Installation
If you have a multibox configuration and want to remove a unit
to make it standalone, you must reconfigure that unit before dis-
connecting any wires.
to make it standalone, you must reconfigure that unit before dis-
connecting any wires.
CAUTION
When you remove a unit from a cluster, all infor-
mation stored in that unit is deleted. This
includes voice mail messages, passwords, and
extension information. If you want this informa-
tion saved, call Bizfon Customer Care at exten-
sion 299.
mation stored in that unit is deleted. This
includes voice mail messages, passwords, and
extension information. If you want this informa-
tion saved, call Bizfon Customer Care at exten-
sion 299.