Hitachi ds14dsfl 3 ユーザーズマニュアル
![Hitachi](https://files.manualsbrain.com/attachments/318a30c9d46cae1a03ff29c8e1a8ce7b06c25f29/common/fit/150/50/c3659964771301ddbc1d53d08b2407adc4af72464bc0f65ffa4212552d47/brand_logo.png)
English
18
HOW TO SELECT TIGHTENING TORQUE
Table 6
Clutch dial
Tightening torque
Operation example
position
Approximately 9 in.-lbs. (10 kg-cm)
Approximately 15 in.-lbs. (17 kg-cm)
Approximately 23 in.-lbs. (26 kg-cm)
Approximately 35 in.-lbs. (40 kg-cm)
Approximately 43 in.-lbs. (49 kg-cm)
Approximately 52 in.-lbs. (60 kg-cm)
High speed: approximately 71 in.-lbs.
(82 kg-cm) (DS14DSFL)
approximately 106 in.-lbs.
(122 kg-cm) (DS18DSFL)
Low speed: approximately 302 in.-lbs.
(347 kg-cm) (DS14DSFL)
approximately 400 in.-lbs.
(459 kg-cm) (DS18DSFL)
Machine screw
tightening Screw
tightening for soft wood
material
tightening Screw
tightening for soft wood
material
Screw tightening for
hard wood material
hard wood material
Thick screw tightening
When used as a drill.
When used as a drill.
1
3
7
13
17
22
NOTE:
The selected content shown in Table 4 indicates
the differences according to screw type, screw size
and material used.
CAUTION:
the differences according to screw type, screw size
and material used.
CAUTION:
●
While operating the Cordless driver drill, take care
not to lock the motor.
If the motor is locked, immediately turn the power
off.
If the motor is locked for a while, the motor or
battery will be burnt.
not to lock the motor.
If the motor is locked, immediately turn the power
off.
If the motor is locked for a while, the motor or
battery will be burnt.
●
Do not tighten too strongly as the screw heads
will be damaged.
will be damaged.
THE SCOPE AND SUGGESTIONS FOR USES
Table 5
Work
Clutch dial position
Suggestions
Wood
Drilling
Steel
Use for drilling purpose.
Aluminum
Machine
1 – 22
Use the bit and socket matching the
Screw
screw
screw diameter.
tightening
Wood
1 –
Use after drilling a pilot hole.
screw
01Eng_DS14DSFL_US
6/8/10, 6:25 PM
18