Hitachi dv18dl 1 ユーザーガイド

11

APPLICATIONS
䡬 Drilling of brick and concrete block, etc.

䡬 Driving and removing of machine screws, wood

screws, tapping screws, etc.

䡬 Drilling of various metals

䡬 Drilling of various woods
REMOVAL AND INSTALLATION METHOD
OF BATTERY
䡬 How to install the battery.

Align the battery with the groove in tool handle
and slip it into place.
Always insert it all the way until it locks in place
with a little click, If not, it may accidentally fall out
of the tool, causing injury to you or someone
around you (Fig. 3).

䡬 How to remove the battery.

Withdraw battery from the tool handle while
pressing the latch (2 pcs) of the battery (Fig. 3).

Fig. 3

Latch

Handle

Insert

Battery

Pull out

Before plugging into the receptacle, make sure the
following points.

䡬 The power source voltage is stated on the

nameplate.

䡬 The cord is not damaged.

<UC18YFL, UC18YRL>
1.

Insert the plug of battery charger into the
receptacle.
When the plug of battery charger has been inserted
into the receptacle, the charge status lamp will
blink in red. (At 1-second intervals)

2.

Insert the battery to the battery charger.
Insert the battery into the battery charger as shown
in Fig. 4. Make sure it contacts the bottom of the
battery charger.

Battery

Charge status
lamp (red)

Overheat lamp (green)

Fig. 4

Push