Frigidaire aeq7000ceg0 インストール手順

5

PACKING

1. Using a rug, blanket or a piece of cardboard packing to protect

the floor, carefully lay the dryer on its left side and remove the
foam shipping base.

2. Return the dryer to an upright position.

1. Dryer MUST be exhausted outside (outdoors, not beneath the

mobile home) using metal ducting that will not support
combustion. Metal ducting must be 4 inches (10.16 cm) in
diameter with no obstructions. Rigid metal duct is preferred.

2. If dryer is exhausted through the floor and area beneath the

mobile home is enclosed, the exhaust system MUST terminate
outside the enclosure with the termination securely fastened
to the mobile home structure.

3. When installing a gas dryer into a mobile home, a provision

must be made for outside make up air. This provision is to be
not less than twice the area of the dryer exhaust outlet.

4. This dryer MUST be fastened to the floor. Mobile Home

Installation Kit No. 346764 is available from your dealer.

5. Refer to pages 2 and 3 for other important venting

requirements.

6. Installation  MUST conform to current Manufactured Home

Construction & Safety Standard (which is a Federal Regulation
Title 24 CFR-Part 32-80) or when such standard is not applicable,
with American National Standard for Mobile Homes.

 The dryer is designed under ANSI Z 21.5.1 or

ANSI/UL2158 - CAN/CSA C22.2 (latest editions) for HOME USE
only.

FOAM

SHIPPING