Frigidaire faqe7071l ユーザーガイド

5

(Mesh bag not included.)

To reduce the risk of fi re, electric shock or injury to 

persons, read the IMPORTANT SAFETY INSTRUCTIONS 

in this Use and Care Guide before operating your dryer.

Dry items of similar fabric, weight and construction in 

• 

the same load.

Separate dark items from light-colored items. Separate 

• 

items that shed lint from those that attract lint.

Check for stains which may not have been removed 

• 

in washing. Repeat stain removal process and wash 

again before drying. Dryer heat may permanently set 

some stains.

Place delicate or small items in 

• 

a mesh bag.

Be sure buckles, buttons 

• 

and trim are heatproof 

and won’t damage 

the drum fi nish. Close 

zippers, button but-

tons,  fasten hooks and 

Velcro

®

-like fasteners. 

Tie strings and sashes to prevent snagging and tangling.

Í

Over-drying can cause wrinkles, shrinkage, lint, 

harshness and a build up of static electricity.

Load items loosely. The av-

• 

erage wet load will fi ll the 

drum 1/3 to 1/2 full. Items 

need room to tumble freely 

for even drying and less 

wrinkling.

If desired, place a dryer fabric softener sheet on top 

• 

of the load at the beginning of the cycle.

To save energy and time and avoid uneven drying and 

• 

wrinkling, do not overload the dryer.

When drying large items, dry only two or three items 

• 

at a time. Fill out the load with small and medium 

sized items.

For delicate or very small loads, add two or three 

• 

similar items to improve tumbling action.

Turn the cycle selector knob in either direction to 

• 

select the cycle desired.

A suitable dryness level and options will automatically 

• 

be indicated for the cycle selected. See the 

tings Chart for more details.

To change the settings, rotate the 

• 

temp knob and 

press the dryness and options buttons to scroll to 

the desired settings.

To select or delete an option, press 

• 

options; then, 

while the indicator is blinking, press select. The indica-

tor will light when the option has been selected. It will 

no longer be lighted when the option has been deleted.

Í

To provide the best care for your laundry, not every 

setting or option is available with every cycle. If a 

setting or option is not available for the cycle selected, 

the indicator will not light.

Press and hold both for ten seconds 

to return to factory settings.

Clean the lint fi lter after every load.

Adjustments made to a cycle will be remembered  and 

• 

recalled each time that cycle is selected in the future.

To return to factory settings, press the 

• 

pause/cancel 

and select buttons at the same time and hold until 

the signal sounds.

To add or remove items when the dryer is running, 

• 

open the door. The dryer will stop when the door is 

opened. Allow the drum to come to a complete stop 

before reaching inside.

Close the door and press Start to resume the cycle.

•