Frigidaire glgq2170k ユーザーズマニュアル

9

The following are specifi c requirements for proper and safe 
electrical installation of your dryer. Failure to follow these 
instructions can create electrical shock and/or a fi re hazard.

For a grounded, cord-connected dryer:

1.  The dryer MUST be grounded. In the event of a 

malfunction or breakdown, grounding will reduce the 
risk of electrical shock by a path of least resistance for 
electrical current.

2.  After you purchase and install a 3 wire or 4 wire power 

supply cord having an equipment-grounding conductor 
and a grounding plug that matches you wiring system, 

 - ELECTRICAL SHOCK HAZARD -

This appliance MUST be properly grounded. Electrical 

• 

shock can result if the dryer is not properly grounded. 
Follow the instructions in this manual for proper ground-
ing.

Do not use an extension cord with this dryer. Some ex-

• 

tension cords are not designed to withstand the amounts 
of electrical current this dryer utilizes and can melt, creat-
ing electrical shock and/or fi re hazard. Locate the dryer 
within reach of the receptacle for the length power cord 
to be purchased, allowing some slack in the cord. Refer 
to the pre-installation requirements in this manual for the 
proper power cord to be purchased.

 - ELECTRICAL SHOCK HAZARD -

A U.L.-approved strain relief must be installed onto pow-

• 

er cord. If the strain relief is not attached, the cord can be 
pulled out of the dryer and can be cut by any movement 
of the cord, resulting in electrical shock.

Do not use an aluminum wired receptacle with a copper 

• 

wired power cord and plug (or vice versa). A chemical 
reaction occurs between copper and aluminum and can 
cause electrical shorts. The proper wiring and receptacle 
is a copper wired power cord with a copper wired recep-
tacle.

 Dryers operating on 208 volt power supply will have 

longer drying times than dryers operating on 240 volt power 
supply.

 - ELECTRICAL SHOCK HAZARD - Improper 

connection of the equipment grounding conductor can result 
in a risk of electrical shock. Check with a licensed electrician 
if you are in doubt as to whether the appliance is properly 
grounded.

the plug MUST be plugged into an appropriate, copper 
wired receptacle that is properly installed and grounded 
in accordance with all local codes and ordinances. If in 
doubt, call a licensed electrician.

DO NOT modify the plug you’ve installed on this appliance.

For a permanently connected dryer:

1.  The dryer MUST be connected to a grounded metal, 

permanent wiring system; or an equipment grounding 
conductor must be run with the circuit conductors and 
connected to the equipment-grounding terminal or lead 
on the appliance.

For a grounded, cord-connected dryer:

1.  The dryer MUST be grounded. In the event of a 

malfunction or breakdown, grounding will reduce the 
risk of electrical shock by a path of least resistance for 
electrical current.

 - ELECTRICAL SHOCK HAZARD - Improper 

connection of the equipment grounding conductor can result 
in a risk of electrical shock. Check with a licensed electrician 
if you are in doubt as to whether the appliance is properly 
grounded.

2.  Since your dryer is equipped with a power supply 

cord having an equipment-grounding conductor and 
a grounding plug, the plug must be plugged into an 
appropriate outlet that is properly installed and grounded 
in accordance with all local codes and ordinances. If in 
doubt, call a licensed electrician.   

DO NOT modify the plug provided with the appliance.