Microtek mv320 ユーザーガイド
43
Specifying the Startup Image
The Startup Image function allows you to specify which
image will be displayed when you turn on the DV
camera.
To specify a new startup image:
1. In Playback mode, select a
To specify a new startup image:
1. In Playback mode, select a
captured still image you
require.
2. Press the MENU button.
3. Use the / button to select
3. Use the / button to select
“ ” – Startup Image.
4. Press the button to display
the available options.
5. Use the / button to choose
“Select”, then press the OK
button.
When “Select” is chosen, the captured still image you
selected is set as the startup image when the “Busy”
message vanishes from the LCD screen.
The next time you turn on the DV camera, the selected
The next time you turn on the DV camera, the selected
image is displayed at startup automatically.
Select the “Default” setting to restore the DV camera’s
Select the “Default” setting to restore the DV camera’s
startup image setting to factory default settings.