Microtek mv500 ユーザーガイド

In addition to being viewed on the DV camera’s LCD

screen, recorded video clips or still images can be

viewed on a TV screen. The TV screen can be used to

frame the subject during video recording.

1. Make sure that both TV set and DV camera are

turned off.

2. Connect the DV camera to your TV set, using the

provided Video cable.

•

Connect one end of the

Video cable to the DV

camera’s TV-output

connector.

•

Connect the other end of the

cable to the Video-In jack of

the TV set.

When connected, a screen

appears, allowing you to switch

between Earphone mode and TV-

out mode.

3. Press the   button, then OK to

switch to TV-out mode.

4. Turn on the TV set, and

select the channel through

the Video Input.

5. Power on the DV camera,

then press the MODE button.

To play back, press the 
button to enter Playback mode (  ).
To use the TV screen to frame the subject during video

shooting, press the   button to enter Video mode ( ).
The image will appear on the TV monitor.

To view images on a TV set, select the video output

system first.

1. Press the MENU button to

enter the Setup mode ( ).

2. Use the 4-way arrow button

to select “ ” – Video Out,

then select “NTSC” or “PAL”.

NTSC: For USA, Canada,

Mexico, Taiwan, Korea, Japan, etc.
PAL: For Europe, Australia, China,

Singapore, etc.

3. Press the   button, then the

MENU button to exit the menu.

BEEP ON

2005/06/14

DATESTAMP ON
NTSC

03:12:15

SETUP

SELECT

2005/06/14

DATESTAMP ON
NTSC
FORMAT
RESET

03:12:15

VIDEO  OUT

SELECT

OK

NTSC
PAL