Microtek d3 ユーザーガイド
18
To remove the SD card, open the SD card cover, push
the card in, and release; the card pops out.
NOTE:
Incorrect insertion of the SD card may cause a memory
error, blocking you from storing any data in the SD card.
You may lose or damage data if you remove the SD card
while it is in operation.
For more information, see the Appendix Using the SD
card.
Inserting the SD Card
A SecureDigital (SD) card (not supplied) can be used to
supplement the cameras internal memory. Images and
movie/audio clips are stored directly onto the SD card
when a card is installed. If a card is not installed,
images and movie/audio clips are stored in the cameras
internal memory. To install an SD card:
1. Make sure that the
camera is turned off, then
open the SD card cover.
2. Insert and push the SD card
into the compartment until
you hear a click.
Ensure that the orientation of
the SD card matches the SD
card icon marking in the SD
compartment.
3. Close the SD card cover
securely.
4. Push the SD cover in the
direction of the arrow to
close it.