Microtek 515m ユーザーズマニュアル

7

The LCD monitor has been preset at the factory with the Timing
shown in the section “Appendix B” to achieve optimal display.
You can adjust the display to the desired brightness and
sharpness by following the instructions.

The OSD (On-Screen Display) lets you easily adjust the various
settings for your LCD Monitor to desired levels of performance.
The OSD includes a main menu and various submenus.

The buttons on the upper left side of the Control Panel are used
to navigate the OSD. Follow the sequence below to do the
following: navigate the OSD menu item, go through the
submenus, select a setting, save or cancel the setting, and
finally exit the OSD item.

  EXIT

Exit the OSD (On-Screen Display).

 

Press to select main menu items.

 

Press to select submenu items.

 —

Adjust setting bars (i.e., CONTRAST,
BRIGHTNESS, etc.) to decrease setting
values of the OSD.

  +

Adjust setting bars ( i.e., CONTRAST,
BRIGHTNESS, etc.) to increase setting
values of the OSD.

 Power

For turning the monitor ON/OFF.

 LED light

Green – Normal operation

  status display

Amber – Power Management
(i.e., DPMS mode: reduces power
consumption < 5W when receiving no
horizontal and/or vertical sync signal)

1. Power on the LCD monitor.
2. Press “ ” or “ “ to display the OSD

menu.

3. Press “ ” to select the main menu

item.

4. Press “ “ to select the submenu

item.

5. Press “+” and “—“ buttons to

adjust.

6. Press the EXIT button when

finished adjusting.