Microtek 120tf 参照マニュアル
10 Microtek ScanWizard Pro TX for Mac & PC
Current Scanner Info
This command provides information about your current scanner. When you
choose this command, a dialog box appears showing the scanner model, the
SCSI or USB ID number, and the firmware version.
choose this command, a dialog box appears showing the scanner model, the
SCSI or USB ID number, and the firmware version.
Scanner Probe
This command shows the scanner information on your SCSI/USB chain. If your
scanner does not show in the dialog box, make sure your scanner is connected
and turned on, and then click the Probe button. Please follow the scanner
hardware installation guide for proper procedures on connecting your scanner.
scanner does not show in the dialog box, make sure your scanner is connected
and turned on, and then click the Probe button. Please follow the scanner
hardware installation guide for proper procedures on connecting your scanner.
Select your interface
card here
Click on the Probe
button to update
information or mount
a SCSI device if it's
not showing in the
dialog box
SCSI devices are
shown with their
corresponding
SCSI ID numbers
shown with their
corresponding
SCSI ID numbers
The SCSI/USB Chain dialog box
(Windows)
(Macintosh)
Select your interface
card here
card here