IBM 560x ハードウェアマニュアル
Flash Memory Update:
The flash memory update is
required for the following conditions:
New versions of system programs
New features or options
To update the flash memory, do the following:
1. Get the appropriate diskette containing the update.
2. Insert the System Program Service Diskette into
2. Insert the System Program Service Diskette into
drive A and power on the computer.
3. Select Update system programs from the menu.
Port Replicator Checkout
Use the following procedure to isolate a port replicator
problem. The port replicator attaches to the system
expansion connector at the bottom of the computer.
problem. The port replicator attaches to the system
expansion connector at the bottom of the computer.
1. Power off the computer.
2. Remove the failing devices from the port replicator.
3. Unplug the AC adapter from the port replicator, if
2. Remove the failing devices from the port replicator.
3. Unplug the AC adapter from the port replicator, if
attached.
4. Remove the port replicator from the computer.
5. Reconnect the failing device directly to the computer.
5. Reconnect the failing device directly to the computer.
(If another device is already connected to the
computer, remove it first.)
computer, remove it first.)
6. Go to the “Running the Diagnostics” on page 47 and
run the diagnostics.
7. If the advanced diagnostic device test did not find an
error, suspect a problem with the port replicator of the
system expansion bus.
system expansion bus.
8. Power off the computer and reconnect the port
replicator.
9. Power on the computer and run the following
advanced diagnostic tests:
Serial port test with the wrap plug (P/N 72X8546)
installed on the port replicator
installed on the port replicator
Universal serial bus test with the test cable (P/N
05K2580) [see “Universal Serial Bus (USB) Test”
on page 48]
05K2580) [see “Universal Serial Bus (USB) Test”
on page 48]
Parallel port test with the wrap plug (P/N
72X8546) installed on the port replicator
72X8546) installed on the port replicator
PC Card (PCMCIA) test with the PC test card
(P/N 35G4703) installed
(P/N 35G4703) installed
FDD-2 device test on the failing device with a
scratch diskette
scratch diskette
10. If diagnostic errors appear, replace the port replicator
or the diskette drive. If the problem remains after the
replacement, replace the system board.
replacement, replace the system board.
11. If power problem appears only when the port
replicator is used, replace the port replicator.
If power shutdown occurs intermittently when using PC
Card devices via a port replicator, suspect an over-current
problem. Some PC Card devices use more power; if the
maximum usage of each devices occurs simultaneously,
the total current will exceed the limit, thereby causing a
Card devices via a port replicator, suspect an over-current
problem. Some PC Card devices use more power; if the
maximum usage of each devices occurs simultaneously,
the total current will exceed the limit, thereby causing a
ThinkPad 560X (2640-60x, 70x)
29