IBM 560x ユーザーガイド
Installing the PC Card Director for OS/2 Warp
Installing the PC Card Director for OS/2 Warp
PC Card Director:
Page 48.
When installing an operating system, you need to install the
following device drivers and software associated with PCMCIA
before you can use the PC Cards:
following device drivers and software associated with PCMCIA
before you can use the PC Cards:
PC Card device drivers:
– Card Services device driver
– Socket Services device driver
– PC Card Power Management device driver
– PC Card Director utility
– Socket Services device driver
– PC Card Power Management device driver
– PC Card Director utility
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
To install the PC Card Director:
1
Turn on the computer and start the operating system.
2
Insert the PCMCIA Installation Diskette for OS/2,
Windows 95 into the diskette drive.
Windows 95 into the diskette drive.
3
Open the OS/2 full screen command prompt.
4
Type
A:\PCMINST2
at the OS/2 command prompt then
press Enter.
5
Follow the instructions on the screen.
6
Click on OK when you have completed the installation.
7
After the installation is complete, close all applications,
remove any diskette from the diskette drive, and restart
the system.
remove any diskette from the diskette drive, and restart
the system.
Note:
Whenever you update the
CONFIG.SYS file, refer to “Adding to
the CONFIG.SYS File” on page 195.
Whenever you update the
CONFIG.SYS file, refer to “Adding to
the CONFIG.SYS File” on page 195.
You have completed the installation of the PC Card Director for
OS/2.
OS/2.
If you want to continue to install all device drivers, continue with
“Installing the ESS AudioDrive Support Software for OS/2 Warp” on
page 110.
“Installing the ESS AudioDrive Support Software for OS/2 Warp” on
page 110.
Chapter 7. Installing Software
109