Trendnet te100-ds24Â 仕様ガイド
The TE100-DS24 dual speed stackable fast ethernet hub
provides a phenomenal level of flexibility and ease of use for
migration to higher bandwidth network environments. Each
port auto-senses between 10Mbps Ethernet and 100Mbps
Fast Ethernet. Once the port speed is determined, the hub
creates independent segments for the 10Mbps and 100Mbps
ports. Linking the 10Mbps and 100Mbps segments together is
achieved through an optional switch module.
provides a phenomenal level of flexibility and ease of use for
migration to higher bandwidth network environments. Each
port auto-senses between 10Mbps Ethernet and 100Mbps
Fast Ethernet. Once the port speed is determined, the hub
creates independent segments for the 10Mbps and 100Mbps
ports. Linking the 10Mbps and 100Mbps segments together is
achieved through an optional switch module.
The optional TE100-DSM switch module can be installed in any hub in the stack, making it possible to
transparently bridge between 10Mbps and 100Mbps segments. In a managed hub stack, more than one
TE100-DSM module can be used to provide automatic redundancy.
transparently bridge between 10Mbps and 100Mbps segments. In a managed hub stack, more than one
TE100-DSM module can be used to provide automatic redundancy.
One 100Base-TX switched port module and one switched 100Base-FX port are also available, in addition
to the TE100-DSM switch module, for greater configuration flexibility.
to the TE100-DSM switch module, for greater configuration flexibility.
TE100-DS24
24-port 10/100Mbps Dual Speed Stackable Fast Ethernet Slave Hub
Plug and Play installation with automatic port configuration
Supports 24 10/100Mbps auto-sensing and auto-negotiation
ports
ports
Uplink port provides easy expansion to another hub
Stackable to five units for a total of 120 ports
Scalable expansion of up to two stacks for a total 238 ports
TE100-DM24 stacks can make use of additional switch
modules for redundancy
modules for redundancy
EIA-19" rack mountable
High visibility LED indicators provide status for each port
Bandwidth utilization LED array for traffic volume display
Automatic Hub ID assignment and front panel display
Built-in auto-partitioning instantly isolates network failures
One RS-232 port allows local terminal access to hub
configuration, diagnosis, and firmware upgrade
configuration, diagnosis, and firmware upgrade
Slide-in switch module allows bridging between 10Mbps and
100Mbps segments, just one switch module is required for
entire stack
100Mbps segments, just one switch module is required for
entire stack
Slide-in switch module for one 100Base-TX connections or one
100Base-FX connection
100Base-FX connection
5 Year Warranty
FEATURES
BENEFITS
Upgradable:
Expandable:
Flexible:
Cost Effective:
Performance:
Ethernet workgroups can be upgraded
to Fast Ethernet without changing
hubs.
to Fast Ethernet without changing
hubs.
Connect up to 120 users per stack.
Also stackable with TE100-D16s hubs.
Also stackable with TE100-D16s hubs.
All 10 and 100Mbps users can exist
on one hub.
on one hub.
Provides 10Mbps and 100Mbps
SNMP stackable hub, and
10/100Mbps switch functionality in
one unit.
SNMP stackable hub, and
10/100Mbps switch functionality in
one unit.
Full 100Mbps connectivity significantly
boosts network performance.
boosts network performance.
TE100-DS24 (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking