Samsung XL24 ユーザーズマニュアル
The screen colors
have changed after
have changed after
changing the video
card.
card.
Settings.
Has the video card been set
properly?
properly?
Set the video card by referring to the
video card manual.
video card manual.
There is a message
that reads
"Unrecognized
that reads
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
(VESA DDC) monitor
found".
Have you installed the monitor
driver?
driver?
Install the monitor driver according
to the
to the
Driver Installation Instructions
.
See the video card manual to see if
the Plug & Play (VESA DDC)
function can be supported.
function can be supported.
Install the monitor driver according
to the
Driver Installation Instructions
.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.
(Do not exceed 60 Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter in the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur,
contact an authorized service center
.
Q & A
Question
Answer
How can I change the
frequency?
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution in the Control Panel →
Display → Settings.
* Contact the video card manufacturer for details.
* Contact the video card manufacturer for details.
How can I set the Power Saving
function?
function?
Windows ME/XP/2000 : Set the function in the BIOS-SETUP of
the computer or the screen saver. (Refer to the Windows /
Computer Manual).
the computer or the screen saver. (Refer to the Windows /
Computer Manual).
How can I clean the outer
case/LCD Panel?
case/LCD Panel?
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let
any water enter the monitor.
any water enter the monitor.
Self-Test Feature Check
Self-Test Feature Check
|
Warning Messages
|
Environment
|
Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.