LG BH7520TW オーナーマニュアル

18

C

onnecting

Blue or yellow The wireless receiver is receiving 

the signal of the wireless TX.

Red

The Wireless Receiver is in 
standby mode.

Off (No 
display)

The power cord of wireless 
receiver is disconnected. 

1.  Connect the Wireless Receiver and the rear 

speaker (right, left) with the speaker cables.

Grey

Rear

Rear right 

Blue

Rear

Rear left 

2.  Connect the power cord of the Wireless 

Receiver to the outlet.

3.  Turn off the unit and insert the Wireless TX into 

the WIRELESS connector on the rear of the unit.

Line

4.  Turn on the main unit: The main unit and 

wireless receiver will be automatically 
connected. 

 

y Insert the Wireless TX with the marked 

“Wireless TX" facing upwards to rear on the 
unit.

 

y Insert the Wireless TX to the line on the 

Wireless TX into the WIRELESS connector on 
the rear of the unit.

 

y Do not insert a wireless dongle other than 

the Wireless TX dongle dedicated for the 
product. The product might be damaged or 
it may not be removed easily.

 

>

Caution

If  RED LED is displayed of wireless receiver unit  
connection of Rear speakers is unsuccessful and 
no sound/audio is present. To solve the problem, 
follow the below steps
1.  Press and hold I STOP button on the unit 

and   MUTE button on the remote control 
simultaneously. 
- “REMATE” is Displayed on Main unit

2.  Press PAIRING button (pin hole on rear of unit 

wireless receiver unit). 
- The blue or yellow LED will flicker

3.  Turn off and on the main unit. 

- If you see “blue or yellow” LED illuminate ON, 
mating of rear speakers  is successful.

4.  If  “blue or yellow” LED does not remain ON, try 

again Step 1 - Step 3.