Omnitron iConverter 4Tx VT 8481-4 プリント
製品コード
8481-4
Ordering inFOrmatiOn
Page 2
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. Irvine, CA 92618
iConverter
4Tx VT
© 2010 Omnitron Systems Technology, Inc. All rights reserved.
iConverter
and
NetOutlook
are Registered Trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-18481-001C
9/10
speciFicatiOns
management
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Management is accomplished by using a Network Management
Module (NMM2) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
module can be accessed via SNMP, Telnet and via a serial port.
The SNMP-based management is accomplished via Omnitron’s
intuitive, graphic-oriented NetOutlook management software
or third party SNMP management software. Management via
the Telnet and the serial interfaces have an easy-to-use,
menu-driven interface.
Some of the real-time 4Tx VT parameters that can be monitored
Some of the real-time 4Tx VT parameters that can be monitored
include link and data receive status. Other parameters include
module type and model, hardware and software revisions,
serial numbers and a user-defined identifier.
The user can override the 4Tx VT module’s physical switch
The user can override the 4Tx VT module’s physical switch
settings by using SNMP or Telnet to remotely configure
switch-selectable parameters such as auto-negotiation, Half or
Full-Duplex, and Backplane Selection.
In addition to all standard iConverter SNMP traps such as
In addition to all standard iConverter SNMP traps such as
module insertion and removal, the 4Tx VT modules can
generate traps on port state changes including link-up and
link-down. Trap monitoring of specific events can be selectively
enabled or disabled by the network administrator.
Model Type
4Tx VT
Protocols
10BASE-T, 100BASE-TX
UTP Connectors
RJ-45
Controls
BP Enable, Auto/Man,
10/100, FDX/HDX
LED Displays
Power, 10/100 UTP Link
Dimensions
W:0.85" x D:4.5" x H:2.8"
Weight
8 oz.
Compliance
UL, CE, FCC Class A
Power Requirement
0.7A @ 3.3VDC (typical)
Temperature
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (hrs)
740,000
Model Type
Connectors
Distance
8481-4
RJ-45 x 4
100m
For wide temperature (-40 to 60º C) modules, add a "W" to the end of
the model number. Consult factory for other configurations and extended
temperature (-40 to +75º C) modules.