Omnitron FlexPoint 100Fx/Tx 4331-2 プリント
製品コード
4331-2
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. Irvine, CA 92618
© 2010 Omnitron Systems Technology, Inc. All rights reserved. FlexPoint is a Trademark of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-04330-004D 9/10
In this enterprise campus application example, FlexPoint
100Fx/Tx media converters are installed in a 14-Module
Redundant Power chassis for high-density fiber distribution
from UTP switch equipment at the Network Core. A UTP
workgroup switch (A) is connected via fiber with a standalone
FlexPoint 100Fx/Tx media converter. Another FlexPoint
100Fx/Tx converts the fiber to UTP in a fiber-to-desktop
application (B). An Ethernet switch (C) is connected directly
via fiber to the FlexPoint module at the Network Core. In all
cases, multimode or single-mode fiber can be used, and fiber
links can be extended up to 120km using single-mode fiber.
sPeCIFICatIONs
aPPlICatION examPle
OrderINg INFOrmatION
Model Type
100FX/TX
Protocols
IEEE 802.3, 100BASE-FX, 100BASE-TX
UTP Cable
EIA/TIA 568A/B, Category 5 and higher
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
UTP Connectors
RJ-45 pins 1-2, 3-6 active,
Categories 3, 4, 5 (EIA/TIA 568)
Fiber Connectors SC, ST, VF-45, MT-RJ
Switches
Switches
UTP crossover, UTP A/N, FDX/HDX
LED Displays
Power: Yellow LED = Power Applied
Auto-Negotiation: Green LED = A/N Enabled
Full-Duplex: Green LED = FDX Selected
Half-Duplex: Green LED = HDX Selected
Fiber/Link Receive: Green LED = Link/Data Received
Fiber Error: Red LED = Fiber Data Error
UTP/Link Receive: Green LED = Link/Data Received
UTP Error: Red LED = UTP Data Error
Dimensions
W: 3.0" x D: 4.0" x H: 1.0"
Weight
6 oz. (without power adapter)
Compliance
UL, CE, FCC Class A
Power
Requirements
Nominal Voltage:
Voltage Range:
Power Nominal:
Maximum Power:
Barrel Connector
9VDC
6.0 to 15.0VDC
0.3A @ 9VDC
1A @ 9VDC
Molex Connector
5VDC
4.75 to 5.25VDC
0.5A @ 5VDC
0.75A @ 5VDC
Temperature
0 to 50
o
C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (Hours)
Module without Power Adapter: 93,000
Module with Power Adapter
-1: 250,000
Module with Power Adapter
-2: 100,000
Fiber Type
Distance
Connector Type
Tx / Rx
Wavelength
[nm]
Min. Tx
Power
[dBm]
Max. Tx
Power
[dBm]
Min. Rx
Sense
[dBm
Max. Rx
Power
[dBm]
Optical Power
Budget
ST
SC
MT-RJ
VF-45
MM
5km
4332-x
4330-x
4336-x
4338-x
1310
-24
-14
-31
-14
7
SM
30km
4333-x
4331-x
4337-x
-
1310
-15
-8
-31
-8
16
SM
60km
4335-x
4334-x
-
-
1310
-5
0
-31
-3*
26
SM
120km
-
4351-x
-
-
1550
-5
0
-31
-3*
26
Power Adapter Kits (-x): -0 = No power adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord)
Contact Omnitron for other fiber options and operational temperature ranges
*When using these models in pairs, a minimum attenuation of 3dB is required.