KitchenAid 20.8 Cu. Ft. 36" Width Built In Panel Ready French Door Refrigerator 使用とお手入れ

2. Pull the bottom out. Then, push the top grille straight up and 

pull it straight out. Place the grille on a soft surface. 

1. Insert top grille hooks (located on the back of the top grille) 

onto mounting bolts on the side trim.

2. Pull the grille down slightly and push the bottom in to lock it 

into place.

1. Remove top grille.
2. Press power switch to the On or Off position.
3. Replace top grille.
IMPORTANT: Be sure the power switch is set to the On position 
after cleaning refrigerator.

Using the Controls

■

The Fridge control adjusts the temperature in the refrigerator 
compartment. The Freezer control adjusts the temperature in 
the freezer compartment.

■

Wait 24 hours after you turn on the refrigerator before you put 
food into it. If you add food before the refrigerator has cooled 
completely, your food may spoil. 

NOTE: Adjusting the temperature controls to a lower (colder) 
setting will not cool the compartments any faster.

■

If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.

■

The recommended settings should be correct for normal 
household usage. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.

■

The actual temperature may differ from the display when a 
door is open for an extended period of time.

The factory recommended set points are 0°F (-18°C) for the 
freezer and 37°F (3°C) for the refrigerator
1. Press the FRIDGE or FREEZER touch pad.

NOTE: After the refrigerator is turned on, the Over 
Temperature audio alarm and indicator light may activate 
every 1

¹⁄₂ hours until the refrigerator and freezer temperatures 

are below 48°F (9°C) and 15°F (-9°C), respectively, or until the 
alarm is turned off. To turn off the audio alarm and indicator 
light, see “Alarm Reset.” 

1. Press the FRIDGE or FREEZER touch pad.
2. Press and hold the COOLING OFF touch pad for 3 seconds.

NOTE: To turn off the power completely, use the power ON/
OFF switch located behind the top grille. See “Power On/Off 
Switch.”

1. Press °C touch pad. To display degrees Fahrenheit, press °F 

touch pad. 
NOTE: If the freezer temperature is below zero, the negative 
sign next to the freezer display will light up. This is normal. 

NOTE: Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.

■

Press the FRIDGE or FREEZER touch pad, and then press the 
Plus (+) or Minus (-) touch pad until the desired temperature is 
reached.

■

Press the SAVE touch pad to program the desired 
temperature.

NOTE: The set point range for the freezer is -5°F to 3°F
(-21°C to -16°C). The set point range for the refrigerator is 34°F to 
42°F (1°C to 6°C). 

B

B

A

A

REFRIGERATOR too cold
Not set correctly for conditions

REFRIGERATOR Control 1° 
higher

REFRIGERATOR too warm
High use or room very warm

REFRIGERATOR Control 1° 
lower 

FREEZER too cold
Not set correctly for conditions

FREEZER Control 1° higher 

FREEZER too warm/too little 
ice 
High use or heavy ice use

FREEZER Control 1° lower