ASUS ASMB4-iKVM ユーザーズマニュアル

2-2

Chapter 2: Installation

To install the server management board:
1.  Remove the remote server 

system cover, and then locate 

the Baseboard Management 

Controller (BMC) connector on the 

motherboard.

Take note of the following precautions before you install the server management 

board to the remote server system.

•  Unplug the server system power cord from the wall socket before touching 

any component.

•  Use a grounded wrist strap or touch a safely grounded object or to  

a metal object, such as the power supply case, before handling 

components to avoid damaging them due to static electricity.

•  Hold components by the edges to avoid touching the ICs on them.
•  Whenever you uninstall any component, place it on a grounded  

antistatic pad or in the bag that came with the component.

•  Before you install or remove any component, ensure that the power supply 

is switched off or the power cord is detached from the power supply. Failure 

to do so may cause severe damage to the motherboard, peripherals, and/or 

components.

2.  Place the board on the BMC 

connector of the motherboard, 

aligning with the pin connectors.

Refer to the Appendix section 

for the location of the BMC 

connector on supported 

motherboards.