Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Configuring Switching Settings
4-27
v1.0, September 2007
•
Root Path Cost – Displays the cost of the path from this bridge to the Root Bridge.
2. Enter the Bridge Priority in the provided field.
3. Select Hello Time, Max Age or Forward Delay and enter the value in the provided field.
4. Click APPLY to update the device.
CST Port Configuration
To configure CST ports on the device:
1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port
Configuration screen displays:
The CST Port Configuration screen contains the following fields:
•
Interface – Displays the port or LAG for which the STP information is displayed.
•
STP Status – Select the STP status on the interface. The possible field values are:
–
Enabled – Enable STP on the interface.
–
Disabled – Disable STP on the interface.
Figure 4-19